Monstera Bangle (Laser Vector File)

On receipt of payment, you will receive a laser ready vector file for this design with two versions (3rd image shows screen shot of laser ready vector file).

Once laser cut, the finished pieces flat pieces can be bent using a heat gun to make bangles.

The vector file is ready to be submitted for a quote for laser cutting and engraving (http://www.vectoretch.com.au/quote-request). File includes two design versions: one with raster engraving, and one with vector (fine line) engraving. See below for pricing examples. Sample bangle shown uses raster engraving, made in pink mirror acrylic.

Quote for laser cut with vector (fine line) engraving: starting at $40 (for the cheapest material e.g. black 3mm acrylic), up to $65 (for the more expensive material e.g. gold and silver chunky acrylic).

Quote for laser cut with raster engraving: starting at $80 (for the cheapest material e.g. black 3mm acrylic), up to $110 (for the more expensive material e.g. gold and silver chunky acrylic). Use raster engraving if you want to apply paint fill technique.

File is laid out to make 7 flat pieces. Each bangle (flat) measures 200mm x 40mm.

Purchasing this listing allows you the rights of use to sell finished products made from this file (so once purchased, can be used for commercial use end products). You may not re-sell this design in it's original format (such as you make copies of the digital file available elsewhere).